ChromaMesh 1″

Description

ChromaMesh 1″

This is made from the same material as our megatree strips.  Comes in 1″, 2″, 3″, 4″ mesh, with excess removed so wind can blow through.  there are mounting holes for zip ties or screws at 6″ spacing around perimeter.  Mesh can be rolled up with nodes mounted and stored.  These measure 4’x8′ sheets for the full sheet matrix.

• Available in Black and White
• 1″ center creates two Matrixes:
  • 47×95 for total of 4,465 nodes
  • 46×94 for a total of 4,324 nodes
  • If you were to fill in holes for both matrixes this would turn into a 1/2″ center Mesh for a total of 8,789 nodes.
• 2″ center creates a 24×48 matrix for a total of 1152 nodes
• 3″ center creates a 16×32 matrix for a total of 512 nodes
• 4″ center creates a 12×24 matrix for a total of 288 nodes
• Works with all 12mm nodes including Bullet, Square and Flat
• 100% American Made from Material, Design, and Fabrication