Name: DayCor ChromaCane
ChromoCane is a beautiful take on an iconic Candy Cane that allows for fast assembly and works with pixels or RGB Nodes. To add color to your daytime display, comes in left or right. Be sure to select with orientation.
So now we are here to satisfy your sweet tooth. Our version of the Candy Cane is the ChromaCane. It is made from 10mm Coro. This is 2.5 times thicker than the 4mm at about 3/8″ thick. They allow you to focus the LED to your audience without having to be diffused similar to our CoroArches. The ChromaCane is almost 36″ tall with 99 mounting holes for 12mm Pixels or RGB nodes in a 3 row by 33 column matrix. We designed them to be ziptied to a stake or our preferred method a segment of 1/2″ EMT Conduit. The universal design allows the ChromaCane to be either left hand or right hand. You can have a ChromaCane ready to go in about 5 minutes, that’s it. All you need to do is load your pixels or RGB nodes and hook it to your controller. For the model you will create a 3×33 matrix to get the best effects.
Works with all 12mm nodes bullets
Almost 36″ tall
3 columns of 33 nodes for a total of 99 nodes per ChromaCane
Super fast and easy installation
Available in White 10mm coro only with Red Stripes in Left or Right
ChromoCane mounts to 1/2″ EMT Conduit or another type of stake with ziptie holes
100% American Made from Material, Design, and Fabrication
The ChromoCanes are design to be ziptied to a stake with the provided ziptie holes. You can install your pixels or RGB’s in just a few minutes. Push the stake in the ground set it up in the sequencer of your choice and enjoy.