Ultimate RGB Air Megatree 50' 96x300 at 2"

Name: Ultimate RGB Air Megatree 50' 96x300 at 2"

This is a heavy duty full Megatree setup for Commercial Use. This is a PREORDER for this seasons delivery. Shipping will not be calculated as these items will use Freight delivery and will be invoice when its ready to ship.

Boscoyo's Tree Configuration:

Base:

1 ea. 50' Megatree Air Mast Tower (about 800 lbs)

1 ea. 24' Base ring with leveling feet and earth anchors

Falcon Controller setup 50' Megatree with 28,800 pixels:

2 ea. F16v3 Falcon Controller

4 ea. Falcon 16 channel expansion boards

12 ea. Meanwell LRS 350w 12v power supplies

2 ea. Bud Industries Enclosure

96 stands by 300 ct pixel strings installed into Boscoyo Studio HD Max Megatree strips (28,800 @ 2" spacing)

96 Steel Topper

**Freight Shipping billed when ready to ship

Installation:

Do not setup in windy conditions.

Place tower with use of dolly where you want it to be. Bolt on rectangle feet with leveling bars that go from feet to pole with provided bolts. Bolt on connecting silver plates from rectangle feet to square pole base. Hook up your air hose.

Set your base ring. Use the leveling feet, with included bolts to set each leveling foot and level needed. Use your level to make sure it is level. Then screw in your provided Earth Anchor in each foot. (If installing on concrete contact us). Put the guy wires and stake them to the ground with provided stake. Now you can start lifting the tree up. Make sure your guy wires have little slack as they will pull as the tree goes up. Then go around and hook all your bottom strips to the provided spring hooks around the base.

**More detailed instructions manual will be provided.